2026 Texas Pride Trailers 7x14x2 Dump - 878401







Get in Touch
AT A GLANCE
"| G.V.W.R.: | 14,000 lbs | | --------- | ---------- | | Empty Trailer Weight: | 3,800lbs (14' trailer with no additional options) | | Net Payload Capacity: | 10,200lbs (14' trailer with no a
Industry
Trailer
Make
Texas Pride Trailers
Category
Dump Trailer
Year
2026
Model
7x14x2 Dump
Trim
Base
Stock
878401
Subcategory
Dump Trailer
Dealer Notes
"| G.V.W.R.: | 14,000 lbs |
| --------- | ---------- |
| Empty Trailer Weight: | 3,800lbs (14' trailer with no additional options) |
| Net Payload Capacity: | 10,200lbs (14' trailer with no additional options) |
| Axles: | Dual 7,000 lb Direct Lube 8 lug (electric brakes on both axles) |
| Suspension: | Heavy Duty Slipper Spring Suspension |
| Brakes: | All wheel electric brakes on all axles (12"" x 2"" brake shoe) |
| Tires: | New 16"" ST235/80R16 10ply radial LRE (3,520lbs ea) |
| Wheels: | 16"" x 6"" eight hole white or silver (based on stock) |
| Main Frame: | 6"" x 2"" x 3/16"" wall rectangular tubing |
| Tongue: | 6"" channel |
| Tilt Frame: | 3"" x 2"" x 3/16"" wall rectangular tubing |
| Cross Members: | 3"" channel |
| Bed Flooring: | 1/8"" thick sheet steel |
| Bed Siding: | 1/8"" thick sheet steel |
| Tie Downs: | Stake pockets & D-Rings |
| Deck width: | 82"" |
| Deck Length: | 12', 14' or 16' |
| Deck Height: | Approximately 26"" |
| Side Wall Height: | 24"" standard |
| Rear Doors: | Double swing doors (open like barn doors) |
| Battery: | Group 24 deep cycle marine |
| Charging System: | Onboard 110v charger and tester (also charges off truck while being towed) |
| Pump: | Electric over hydraulic (1.7 gpm) - power up / gravity down |
| Controller: | 15' corded remote control |
| Toolbox: | Front locking tool box - contains battery and pump |
| Hydraulics: | Multi stage trunnion mount telescopic cylinder |
| Coupler: | 4 hole adjustable height 2 5/16"" ball |
| Safety Chains: | Two heavy duty safety chains |
| Jack: | 7,000 lb drop leg jack |
| Fenders: | 14ga heavy duty tread plate |
| Lighting: | All flush mount or recessed lifetime LED stop / turn / clearance lighting |
| Wiring: | U.S. made sealed modular wiring harness |
| Safety Equipment: | DOT required emergency break-a-way kit and conspicuity tape & Prop Rod |
| Finish: | Fully primed and painted with automotive grade acrylic enamel |"
Info
Condition
New
Location
Dickson, Tennessee
Availability
Available
Axles
2
Length
168"
Width
84"